Sunday, November 22, 2026

Build Your Own Cabinets: DIY Revolution

Related

A single father‑son duo slashed a $6,000 cabinet quote to under $1,000 with a weekend garage project.

DIY Cabinet Build Defies Professional Estimates

The job required three 19‑inch‑high, single‑drawer cabinets that fit a 9‑foot wide, 2‑foot deep alcove, holding a large flat‑screen TV and hidden electronics. The dimensions were non‑standard, prompting local shops to quote $6,000 at the low end and just under $9,000 at the high end.

Instead of accepting the bids, the son used a jobsite table saw, a track‑saw kit, a nail gun and clamps to build the cabinets himself, enlisting his father as a helper.

He selected 3/4‑inch 7‑ply plywood for the cabinet boxes to create a half‑thickness dado channel that would support the bottom panel and resist warping, a choice confirmed by his father.

Using precise measurements and a 0.5 mm mechanical pencil, the team cut the 4‑by‑8 sheets on a track saw, achieving cuts within 1/64 inch of the intended dimensions.

Assembly involved gluing and nailing the sides with a 3/4‑inch dado blade set, then constructing drawers from 1/2‑inch 5‑ply plywood with half‑lap joints and flush fronts. Soft‑close hardware and an electric sprayer completed a finish that matched professional work.

According to the father, material costs totaled less than $1,000, saving roughly $6,000 compared with the contractor quotes, and the project required only three Saturdays of work.

Readers should type “go.” before askthebuilder to access a list of books that provide high‑quality plans and step‑by‑step assembly tips.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Latest article